CBE PC100 Kit
Microprocessor controlled system with LED display, with the following functions: Car battery test, services battery, control lights, control water pump, control external light, batteries parallel relay, control fridge, protection fuses, car battery recharging control, save service battery function. The system includes: PC100 control panel (dia 192 x 78mm), 12v distribution box protection fuses, switching mode battery charger, screw probes for waste water tank (fresh probe not included), cables for control panel L=6m, 50A fuse + fuseholder for batteries (car & service)
The PC100 Kit includes:
- PC100 LED Display Panel
- DS300 12v Distribution box & fuses
- CB516 16A Switching battery charger
- DS1205 RCD Consumer unit
- 230v AC junction box
- Waste couple screws, connections and pins
- Wiring harnesses, connector blocks and terminals
Specifications
PC100 control panel with LED display
- Voltage rating: 12V DC
- Panel trim colour: Dark grey
- Dimensions: 192mm (W) x 78mm (H)
- Fixing type: Recessed panel mount
DS300 12V Fused Distribution Box
- Voltage rating: 12V DC
- No. fuse locations: 11
- Fuse values: 3 - 30A (dependent on circuit)
- Battery low voltage cut-out: 10V DC
- Battery re-engage voltage (following cut-out): 12V DC
- Starter battery trickle charge bypass current: 2A max.
- Split charge relay rating: 70A
- Battery and ground stud size: M6
- Overall dims: 140mm (W) x 180mm (H) x 85mm (D)
- Fixing type: Surface mount (mounting feet supplied)
DS1205 230V AC Consumer Unit
- Voltage rating: 230V AC, 50Hz
- Miniature circuit breaker rating: 1 x 13A double pole
- RCD rating: 25A, 30mA
- Overall dims: 140mm (W) x 180mm (H) x 85mm (D)
- Fixing type: Surface mount (mounting feet supplied)
CB-516 16A Switch Mode Battery Charger
- Charging type: 4 stage automatic (bulk, absorption, float, stand-by)
- Input voltage rating: 230V AC nominal
- Output voltage rating: 13.5 - 14.3 V DC (depending on charge stage and battery type)
- Output current: 16A max.
- Battery compatibility: Wet & sealed lead-acid, gel, agm (not compatible with lithium)
- Protection: Thermal overload
- Recommended battery capacity: 40 - 150Ah
- Overall dims: 140mm (W) x 180mm (H) x 85mm (D)
- Max. working temp: 50°C
- Fixing type: Surface mount (mounting feet supplied)
*The CBE Fresh Water Tank Probe is not included as available in various lengths.
