Kampa Dometic Action Air VW Freestanding Drive Away Campervan Awning

£429.95

(Inc. 20% VAT)

~~£565.00~~

Saving Of

£135.05 (24%)

In stock

–

Delivery

No charge

Description

Kampa Action Air Freestanding Drive Away Campervan Awning

Ideal for campers who are always on the go, the Action AIR is a free-standing awning which allows you to drive-away while still reserving your pitch on site. Boasting a spacious living area and full-height windows with privacy blinds, the awning comes with a fully waterproof clip-in groundsheet and a large protective canopy. Air Frame model.

Features & Specifications

Super lightweight 68D polyester is easy to handle, durable & waterproof
Provides sheltered access to the awning & prevents rain running in when you unzip the door
A large mesh panel behind the front door adds ventilation & comfort in hot weather
Generous dimensions provide ample internal space. Crystal clear windows, spacious bedrooms and comfortable living areas maximise the liveable space of your pitch and help you make the most of your holiday.
Width: 2900mm
Depth: 2700mm
Tunnel width: 2900mm
Tunnel depth: 900mm
Connection height height: 1800 - 2100mm
Height at front: 2050mm
Pack size: 680 x 360 x 340cm
Weight: 14.83kg

Connection Methods

Keder Beading - The tunnel has Keder beading sewn to its top edge. The beading can be threaded into ‘figure-of-8’ extrusion (not supplied) and the figure-of-8 clipped to the gutter on the side of the vehicle. Kampa figure-of-8 extrusion is available on our website.
Guyline / Rope - If your camper does not have a gutter it is possible to pull the tunnel to the vehicle by attaching guy lines/ropes (not supplied) to the top corners of the tunnel, throwing these over the vehicle and tying them to the wheels or pegging them down. Take care that the guy lines/ropes do not damage the vehicle.
Velcro Straps - If your vehicle has roof bars installed, the velcro straps, attached to the pole sleeve, can be fixed around them.
Pole & Clamp (optional parts required) - This requires an optional pole and clamp set available from your dealer. The pole is threaded through the sleeve in the top of the tunnel. This is then dropped into the gutter on the side of the camper and secured using the clamps provided.
Using your roll out awning (if fitted) - The Keder beading can be slid into the channel found on the front of most roll out awnings. It may be necessary to use a Drive-Away kit to convert the size of the beading. Pre-attached 6mm Kador strip can be used with a 6mm to 4mm Drive-Away Kit to attach to a Fiamma or Omnistor wind-out sun canopy.